CC121 does not work with Wndows 10 and Cubase 10

All about Steinberg's Advanced Integration Controller CC121.
Post Reply
User avatar
Andrey Ku
New Member
Posts: 6
Joined: Mon Dec 16, 2019 10:33 pm
Location: Boario Terme, Italy
Contact:

CC121 does not work with Wndows 10 and Cubase 10

Post by Andrey Ku »

Today I bought CC121 I have tried to install the device three times without success with Windows 10 and Cubase 10. Nothing works. Tomorrow back in the shop.

dr
Member
Posts: 940
Joined: Sat Dec 25, 2010 11:43 am
Contact:

Re: CC121 does not work with Wndows 10 and Cubase 10

Post by dr »

working here - so something else going on in your installation

User avatar
Andrey Ku
New Member
Posts: 6
Joined: Mon Dec 16, 2019 10:33 pm
Location: Boario Terme, Italy
Contact:

Re: CC121 does not work with Wndows 10 and Cubase 10

Post by Andrey Ku »

hahaha surely something is wrong with installation or hardware but who can know what Steinberg and Microsoft did for a simple non-expert user.

User avatar
DaveAbbott
Member
Posts: 677
Joined: Sun Feb 06, 2011 7:51 am
Location: Johannesburg, South Africa
Contact:

Re: CC121 does not work with Wndows 10 and Cubase 10

Post by DaveAbbott »

Hi all

Working perfectly here too

Best Regards, Dave
Dave Abbott
Entertainer | Musician | Producer
cricket@iafrica.com

Computer i7 3 Ghz CPU, Intel Mobo, DX58SO, 12Gig DDR1600 RAM, System Drive 64 Gig SSD + 480 Gig SSD sample drive + 3 x 1TB recording and sample drives.
Software: Windows 10 Pro 64Bit, Cubase 10 Pro, Wavelab 9.5, NI Komplete Ultimate, UAD, Waves, and various other plugs
Interface: Steinberg UR824 with Focusrite ISA One, Focusrite Octopre, Cubase Elements 8.5 with Focusrite 18i8 on spare machine. Cubase Elements 9.5 with Focusrite 18i8 on Stage Laptop (Dell 6430 i7 with 8gig RAM)
Korg Taktile 49 Controller Steinberg CC121 Controller

Rule 1: Have Fun! Rule 2: It's Not Serious! Rule 3: When in doubt refer to Rule 1!!

KOLAMBO
New Member
Posts: 2
Joined: Mon Feb 03, 2020 9:27 pm
Contact:

Re: CC121 does not work with Wndows 10 and Cubase 10

Post by KOLAMBO »

Hello all

Need some help here guys..

I reinstalled my whole system yesterday, gone to WIN 10 Pro and Cubase 10.5. Everything is perfect, but I can not install the CC121 drivers. I see the device in the device manager but the drivers are not loaded.

I tryed Tools, Extension and driver only. Tools and Extension installation completes. But if I want to install driver only there is an error: "Drivers are to old for this system."

My CC121 was off during installation like the manual says.. PLEASE HELP

Windows 10 Pro info: x64 - V 1909

Post Reply

Return to “Steinberg CC121”

Who is online

Users browsing this forum: No registered users and 0 guests