Motorised fader replacement.

busker991 · November 19, 2020, 8:30pm

Mrhehon:

I replaced mine with the same fader in the link earlier and the tracking/calibration is way off fader only moves in a small space in the middle.
I noticed there was a another different LS9 fader on Thomman:
https://www.thomann.de/gb/yamaha_ls_9_01v_motorised_fader.htm?glp=1&gclid=Cj0KCQiA-rj9BRCAARIsANB_4ABHR8Cs1BkwqrDjG6Z8a0PPCGRCwi5OxMGrfyP5162LoXU3vuy7twoaAv-XEALw_wcB
The one i replaced it with was identical to the original apart from it had a rubber dust cover under the actually fader slider.
Did i buy the wrong one?

It’s a long time ago now but I’m sure the one I bought did not have a rubber dust cover and I believe was the cheaper of the two. I hope I did not link you to the incorrect fader, if so I’m really sorry. Just for info mine is still working as new. Maybe thomann will let you swap, their service has always been good for me. Let me know how you get on.

Ok many thanks for the reply.
I figured that was probably the case. I’ll see if i can get it swapped although it’s not a big deal buying the other one as it’s a hell of a lot cheaper than replacing the whole unit