RX 7 connect does NOT work

+1

Works on Mac, though it is flaky. If you have “auto apply” on, you just have to click your hot key (if you use one) once and NOT hit ENTER. Same on the round trip back. But, I often find in N7 and N8 that sometimes after you “send back” in RX and “apply” it in Nuendo, it round trips back to RX with the raw audio again. Haven’t figured out exactly why because it’s different every time. Maybe I’m not crossing my toes.

Well, since it’s an offically bugbased problem in RX 7 now I guess we’ll have to wait a while for it wo be fixed again.
In the meantime I transfer to RX 6 advanced, copy and paste to rx7 adv, do my work, copy and paste back to rx 6 and then back to Nuendo. :confused:

It’s 2018 and I can’t see why I cannot just use drag and drop or double click to use external stuff like rx.

On my recent project for Amazon Prime I must have used RX a couple of hundred times…thank god RX6 still works…

Izotope has not implemented the VST specifications correctly.
That is the main reason why the problems remain with “RX Connect”.
So until Izotope doesn’t fix that fundamental problem, we will never be able to send and send back with a (one) simple Key Command.
The way it should work.

Fredo

It was working okay for me with the latest 8.2 and 6 advanced

Just tested this and it works fine here.


Hit KC: RX7 Connect
===> DOP Opens
Hit “Apply”
===> Audio is send to Rx 7 Editor
Hit “Send Back” in Rx7
Hit “Apply” in DOP.

It becomes problematic when you have AutoApply “on”, because that’s where RX goes “illegal” in the vST3 spec.
This can only be solved by Izotope.


Even easier when you add “RX7 Connect” to your DOP favorites. (A favorite always applies the chosen process/preset/value directly)

Hit “RX7 Connect” in DOP Favorite
===> Audio is send to Rx 7 Editor
Hit “Send Back” in Rx7
Hit “Apply” in DOP.

HTH
Fredo

Well, it does not work on my machine and it does not work on iZotope’s service machine otherwise they would not have bugbased it?

Knowledgebase specifically says to disable Auto Apply.

https://helpcenter.steinberg.de/hc/en-us/articles/115000946570-Nuendo-8-Direct-Offline-Processing-iZotope-RX-Connect-

It’s a Mac only bug

RX7 Connect is working here in N8.2 & 8.3, but it is much much slower to send and apply than RX6 Adv was which is frustrating, and a lot of patience required watching the little spinning wheel.

Same think here… Send and send back to Rx 7 is really really really long compare to Rx5.
Someone send this problem to izotope ?

And that’s why I have finally ordered my PT Ultimate reinstatement plan today.
I unexpectedly have a couple of weeks to learn.
Tbh, I don’t care why things don’t work here, the only thing I see is that Steinberg obviously does not offer solutions for my problems while I get more game audio buzzword releases, which I don’t need.

With Cubase 10 and the latest RX 7 I’m finding that it sends fine to RX Connect, but when coming back and hitting Apply it round trips back to RX Connect again…

Not awesome.

Connect and Monitor are still an issue… I have contacted Izotope several times and they have reluctantly admitted that this function does not work with Nuendo 8 and RX 6, but I have not confirmed with 7… Im definitely not assuming it works… This is a huge tool for post production since not all of the isotope tools are usable as plugins.

I would like to point out that we are Mac based, so I am not sure about how PC guys are doing (don’t even get me started on apple)

PC is fine.
For the moment.
:slight_smile:

Fredo

Exactly the same here. It’s just an endless loop on PC, I am unable to apply the return trip to the audio. (Auto-apply is DISABLED).

Still an endless loop here with Cubase 10.0.10.

Has this been resolved in any way. RX7 is a piece of crap here on a PC with 8.3. When are going to be able to work with two different pieces of audio like Pro Toll people can?

Steinberg announced the aquisition of spectral layers pro at NAMM.
Pretty ugly marketing move to break RX6 then RX7 integration imho.