[Request] dspMixFx Loopback Routing

This section is about Steinberg's UR-C audio interfaces product range
Post Reply
Bison204
New Member
Posts: 3
Joined: Sun Mar 08, 2020 3:07 pm
Contact:

[Request] dspMixFx Loopback Routing

Post by Bison204 »

Hello all, after speaking with customer service, I was told that I should make firmware change requests on this forum.

I am wanting to request a modification to the way loopback is handled for the UR-C series (I own UR44C) in the dspMixFx. Currently, loopback sends to outputs 1&2, effectively using 2 of 6 inputs. It also combines audio from any input into (I had a mic plugged into input 3 and it was mixed into the loopback in my DAW on channels 1&2).

I am hoping for the following features to be added, via firmware update:
- allow loopback to be routed to it's own tracks without mixing with physical inputs, allowing us to post process DAW loopback seperately from physical inputs.
- allow loopback to be routed through virtual inputs, allowing users to use all physical inputs on the device as well as use the loopback feature.

Thank you for your consideration.

Post Reply

Return to “Steinberg UR-C Series”

Who is online

Users browsing this forum: No registered users and 2 guests