UR22C 32bit confusion

This section is about Steinberg's UR-C audio interfaces product range
Post Reply
SideScroller
New Member
Posts: 1
Joined: Mon Mar 02, 2020 9:34 am
Contact:

UR22C 32bit confusion

Post by SideScroller »

Hey guys so I am a little confused on how to enable 32 bit on my computer with my ur22c. I have a Strix z390 which have onboard 32bit sound which shows in the sound control panel, but when I check my ur22c in the sound control panel I only get 24bit 192k (with onboard I get 32bit 192k). The interface is marketed as having 32bit I am just unsure on how to achieve it. Any help would be greater appreciated!

Every thing is up to date (interface is at 1.0.1 I believe and software is at 2.0.2)

ca-booter
Member
Posts: 306
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: UR22C 32bit confusion

Post by ca-booter »

The Windows WDM driver says 24 bit indeed, but like in this article described it has to do with the windows audio handling. The hardware will always record/convert in 32bit.

https://support.focusrite.com/hc/en-gb/ ... n-Windows-
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

Be Papillon
New Member
Posts: 1
Joined: Fri May 01, 2020 1:14 pm
Contact:

Re: UR22C 32bit confusion

Post by Be Papillon »

hello I just installed my new UR 22c sound card for the match with my Cubase pro 10.5.12 and I have had problems of extreme slowness since that time, I haven't even created a new audio track yet, it's is very slow to navigate ,, blizzard as soon as I unplug my sound card everything back to normal ,, can you help me please, I tried to change in my steinberg usb control panel to put it at high-speed (usb2 .0) because I think my computer is too old for usb 3.0, and it doesn't work either I click on 2.0 and it automatically reverts to 3.0 help me please

ca-booter
Member
Posts: 306
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Re: UR22C 32bit confusion

Post by ca-booter »

You did not give any specs of your computer, but try to plug it into a USB2 port, then automaticly the card will switch to usb2. See if that helps.
Latest drivers for USB ports?
I don't think the computer is too old for USB3, if it was indeed "too old" Cubase PRO 10.5 would not run decently at all.
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

Post Reply

Return to “Steinberg UR-C Series”

Who is online

Users browsing this forum: No registered users and 2 guests