Recording with the UR816C

This section is about Steinberg's UR-C audio interfaces product range
Post Reply
ca-booter
Member
Posts: 294
Joined: Mon Mar 21, 2016 8:38 pm
Location: Netherlands
Contact:

Recording with the UR816C

Post by ca-booter »

I did a short recording test with the UR816C.
I read some people complained about losing the ControlRoom function in Cubase when using these URC interfaces.
The manual explains how to use the interface integrated into Cubase and indeed the new "HARDWARE" function in the Inspector becomes only available when you disconnect the ControlRoom.

But............I wonder why you should use this hardware function and not use its own DSPFX mixer?
Maybe someone can explain to me the benefits or disadvantage?

I did record a guitarpart through the ampsim of the URC to a backling audiotrack.
I recorded in two ways:
First the way explained in the manual, so make all adjustments in the inspector, but then you lose the ControlRoom, which I do not want.

Secondly I recorded making all adjustments in the DSPmixer, and not on the Cubase recording-track (so there is no "hardware" tab in the inspector) and that gives exaclty the same result and you can keep the ControlRoom function activated in Cubase.

Both ways I did not activate "direct monitoring" in Cubase (why should you..?) and offcourse did not activate the little speaker-icon on the audiotrack you record on.
PC ASUS i7-2600 3,4Ghz |Win10-Pro 1909 SSD | 16Gb DDR3 | ASUS R5230 graphics | Cubase Pro 10.5.20, user since Atari | Wavelab 10 EL | Absolute 3 | SuperiorDrummer3 | Yamaha-Steinberg N12 FW | Steinberg UR816C+Behringer ADA8200 | Behringer X-Touch One | M-Audio Axiom 61 | Fishman TriplePlay | Lexicon MX200, Strymon Volante, Art Pro VLA II, Art Pro Channel II, Klark Teknik: KT-2A, 1176-KT, 2* EQP-KT

Post Reply

Return to “Steinberg UR-C Series”

Who is online

Users browsing this forum: No registered users and 1 guest