Post general topics related to Cubase Pro 10, Cubase Artist 10 and Cubase Elements 10 here.
- New Member
- Posts: 1
- Joined: Sat Mar 14, 2020 1:10 am
I'm trying to setup a Korg Nanokontrol Studio to work with Cubase Pro 10.512. I followed the owner manual instructions (see below). Cubase appears to recognize midi activity (the midi activity indicator flashes blue) when I spin the jog wheel and move faders etc. However nothing happens, the faders don't move, tracks are not selected, the transport controls don't activate. Anyone else have similar issues? Did I miss something here?
FROM THE KORG NANOKONTROL STUDIO OWNERS MANUAL
Setup for using the nanoKONTROL Studio
1. While holding down the Scene and Marker Set buttons, turn
on the nanoKONTROL Studio to set it to Cubase mode.
Once the nanoKONTROL Studio has been set to Cubase
mode, it will continue operating in that mode.
2. In Cubase, open “Device Setup”, and then add “Mackie Control” to “Devices”.
3. Open the page for the added Mackie Control, and then select the nanoKONTROL Studio ports as the MIDI input and
output ports to be used.
4. Open the “MIDI Port Setup” page, and then clear the “In
“All MIDI Inputs”” check box for nanoKONTROL Studio.
- New Member
- Posts: 12
- Joined: Wed Oct 19, 2011 4:44 am
Did you ever get this to work? It works great for me as per the instructions you posted.
OS: Windows 10 64bit
DAW: Cubase Pro 10 v10.5.20 (64bit) and Cubasis v3
CPU: i7 4790K Quad-Core 4.0 GHz LGA 1150
Motherboard: ASUS Z97-A USB 3.1
Graphic Card: Nvidia NVS 310 - Driver v390.65
RAM: 32GB DDR3 2133
Drives: 1 HDD, 1 Hybrid Drive and 2 SSDs (One for the OS)
Audio Interface: Focusrite 18i8 - v3.6
Network Adapter: Asus PCE-N15 11n Wireless LAN PCI-E Card
Users browsing this forum: No registered users and 5 guests